Pages

▼

Friday, April 19, 2013

How to Flash Press FlexCut™ Sticky LT



Heat Transfer Tip: How Flash Pressing Saves Time & Money  


SEF has a new heat transfer solution that saves time and money. Here’s how. When decorating a heat sensitive fabric, SEF's FlexCut™ Sticky LT (low temperature) is typically heat pressed at 235°F (115°C) for 17 seconds.

"Flash Pressing" reduces pressing time to only 9 seconds

Did you know that you could also “flash press” FlexCut™ Sticky LT onto regular cotton fabrics and cotton blends? By heat pressing FlexCut™ Sticky LT at a temperature of 320°F (160°C), you can reduce the pressing time to only 9 seconds. That’s a savings of 8 seconds per piece.  

Over the course of a year that 8 seconds can add up to big savings. Let’s imagine that you typically heat press 400 garments a day. By reducing pressing time by 8 seconds, you save an hour each day. At an average of 220 working days a year and a burdened hourly shop rate of $75 per hour, your annual savings amounts to more than $15,000.  

If you would like to put FlexCut™ Sticky LT to the test, call your participating SEF distributor.  

Heat Transfer Machines


Selling heat transfer appliques to your existing customer base is a great way to increase your shop’s sales at high profit margins without a lot of effort.  The manufacturing process is not very complicated, so there is not much to learn. What you will need is a heat press machine. Here are a few equipment suggestions:


Hotronix Hover 16x20" Heat Press Auto Open  - Heat Transfer Press Machine 



Features of the Hotronix Hover 16” x 20" Heat Press Machine:

● Heavy-duty professional grade machine with proven performance.

● Opens automatically. This prevents scorching of heat transfer films.

● Opens wide providing safe and easy layout and removal of garments.

● Easy to read digital display.

● Clamshell design saves space.
● Easy to use.
● Made in the U.S.A.



Hotronix Fusion Heat Press 16" x 20"

The Hotronix Fusion 16" x 20" Heat Transfer Press provides the following features:

● Large 16" X 20" heat platen accommodates most garments.
● Modern, easy-to-read digital display for time, temperature and pressure.
● Durable, scratch resistant powder coat finish.
● Easy to operate. Require minimal training.
● Heavy-duty construction for reliable performance.
● Energy-saving sleep mode.

● Made in the U.S.A.



Hotronix Air Fusion 16"x20"
 Hotronix Air Fusion 16"x20" Heat Press Swing-Away Table Top features the following:
● Heavy-duty version of the FUSION® Heat Press is designed for high volume work.
● Powered by an air compressor. Pneumatic regulator which auto-adjusts pressure.
● High-tech power with hands-free auto-swing for superior ease of use.
● Touch screen controller.
● 16"x20".


Hotronix MAXX Cap Heat Press 


Hotronix MAXX Cap Heat Press 3.5" x 6" provides the following features:

● Easy-to-read digital time and temperature display.
● Consistent heat and pressure from edge-to-edge.
● Coated non-stick heat platen.
● Lightweight and portable for mobile heat printing.
● Interchangeable platens available.

ARTICLES ABOUT HEAT TRANSFER FILMS

Laminating Application Tape and Hot Mask Films
Stretching Garments Prior to Heat Pressing
The Differences Between Polyurethane and Vinyl Films
Printing Tatoo with Seiko Fluorescent Inks
Reflective Heat Transfer Films
SEF Heat Transfer Films Instructions
Introducing Tatoo Printable Heat Transfer Films
HotMask Polyester Transfer Tapes
Correcting Plotter Cutting Problems When Cutting H...
Which Films Stick to Coated Fabrics? 
The Difference between FlexCut Sticky and FlexCut ...
Heat Transfer Films Product Application Chart
Rules for Overlaying Heat Transfer Films 
Comparing Heat Transfer Films with Screen Printed ...
Peel Recommendations for Heat Transfer Films
Heat Pressing Appliques on Leather 
Plotter Cutting Heat Transfer Films
Cutting & Weeding Tips for Heat Transfer Films
The Trouble with Shrinking Shirts
Caring for Garments with Heat Transfers

For More Information About SEF Americas:


14476-201 Duval Place West
Jacksonville, FL 32218
904-423-0211 - Phone
904-423-0899 - Fax
844-720-9600 - Toll Free
Ordering: sales@SEFamericas.com
Web: NEW SEF Americas Website



Click Here: SEF Americas Shared Public Folder



About Jim Hingst: After fourteen years as Business Development Manager at RTape, Jim Hingst retired. He was involved in many facets of the company’s business, including marketing, sales, product development and technical service.

Hingst began his career 42 years ago in the graphic arts field creating and producing advertising and promotional materials for a large test equipment manufacturer.  Working for offset printers, large format screen printers, vinyl film manufacturers, and application tape companies, his experience included estimating, production planning, purchasing and production art, as well as sales and marketing. In his capacity as a salesman, Hingst was recognized with numerous sales achievement awards.

Drawing on his experience in production and as graphics installation subcontractor, Hingst provided the industry with practical advice, publishing more than 150 articles for  publications, such as  Signs Canada, SignCraft,  Signs of the Times, Screen Printing, Sign and Digital Graphics and  Sign Builder Illustrated. He also posted more than 325 stories on his blog (hingstssignpost.blogspot.com). In 2007 Hingst’s book, Vinyl Sign Techniques, was published.



© 2015 Jim Hingst
at

No comments:

Post a Comment