RTape Introduces 485L HotMask

The HotMask™ Transfer Tape for Printed Flock Heat Transfer Films

Transferring printed flock films is extremely difficult, because of the highly textured surface of the flock fibers.  Standard application tapes used for vinyl graphics, including ultra-high tack tapes, just don’t work.

For this very difficult application, RTape introduced its HM485L HotMask™, which is designed to transfer printed flock films, such as EcoPrint and FiberPlus.  This transparent polyester film is coated with a high tack silicone adhesive and protected with a white embossed polypropylene release liner.

485L is a clear polyester hot mask transfer tape for printed flock films. The adhesive of 485L is protected with a  white embossed liner. 

HM485L exhibits exceptional adhesive properties to transfer printed appliques, including flock graphics with plotter cut copy, script or intricate detail. The clarity of the film aids accurate positioning of printed heat transfer appliques to garments.

Before laminating the HM485L HotMask, weed the matrix from the print.

When laminating the HotMask to the print, use good squeegee pressure.

After laminating the HotMask, peel the carrier or liner from the back  of the print.

During the heat press operation, HM485L protects the printed media from the high temperatures of the top platen, preventing discoloration and distortion of the applique. The polyester (PET) facestock of the HotMask™ withstands heat cycles as long as 60 seconds at 330° F (166°C).

After heat pressing the printed flock applique, remove the HotMask while it is warm. 

Following the heat pressing cycle, the HM485L HotMask™ removes easily and cleanly in one piece, within a few seconds, while it is still warm. HotMask™ tapes are designed so they do not leave any residue on the printed graphic. The new HotMask™ transfer tapes also work well with all brands and types of print­able flock heat transfer films.

For additional information, contact your RTape distributor or visit RTape at www.rtape.com.

COMMENTS PLEASE

To contact Jim Hingst, write him at hingstjim@gmail.com or at Jim Hingst, PO Box 671, Chesterton, IN 46304 USA. For immediate assistance, call RTape at 1-800-440-1250 or 908-753-5570.

© 2012 Jim Hingst